The MedLight M7 and M7+ are commercial full-body LED light therapy beds designed for sports recovery rooms, spas, wellness clinics, gyms and beauty centers.
The surrounding LED layout exposes the body from above and below during the same session. This allows businesses to provide a consistent full-body service without moving several panels or asking the client to change position.
M7 and M7+ share the same bed structure, wavelengths, controller and operating features. The main differences are LED quantity, electrical current and rated power. Buyers can select the model that fits their expected daily appointments, available electrical supply and equipment budget.
Description and Benefits
Full-body exposure in one appointment
The M7 series combines an upper canopy with a lower acrylic bench. When the canopy is closed, the user is surrounded by red and near-infrared LEDs.
The acrylic panel has high light transmittance, allowing light from the lower section to reach the body while providing a smooth lying surface. The curved canopy helps distribute light across a broad area.
This layout is practical for commercial facilities because staff do not need to adjust several freestanding panels for each client. Once the protocol and session time are selected, the machine can complete the session automatically.
Five wavelengths for flexible recovery programs
The M7 and M7+ use five wavelengths:
- 633 nm red light
- 660 nm red light
- 810 nm near-infrared light
- 850 nm near-infrared light
- 940 nm near-infrared light
The red wavelengths are commonly selected for surface-level skin exposure. The near-infrared wavelengths penetrate more deeply and are often included in routines focused on exercise recovery, muscles and joints.
Each wavelength can be controlled independently. Operators can use one wavelength, select several wavelengths or operate all five together.
This gives spas and wellness clinics more flexibility when creating different service packages from the same LED light therapy bed.
M7 or M7+: choosing the right model
The M7 is equipped with 13,440 LEDs and has a rated power of 2,200 W. It is the more economical model for facilities introducing full-body red light therapy or expecting a moderate number of appointments.
The M7+ increases the LED quantity to 26,880 and the rated power to 4,500 W. It is better suited to operators wanting a higher-output configuration or planning to use the machine more frequently.
| Model | LED Quantity | Current at 220 V | Rated Power |
|---|---|---|---|
| M7 | 13,440 pcs | 12 A | 2,200 W |
| M7+ | 26,880 pcs | 21 A | 4,500 W |
LED quantity and power should not be considered alone. Room size, local electrical capacity, expected client volume, irradiance and cooling performance are also important when choosing between the two models.
Irradiance for commercial sessions
The specified irradiance range is approximately 48–100 mW/cm².
Actual exposure depends on the selected wavelengths, pulse settings, duty cycle and the user’s position inside the bed. Buyers comparing LED light therapy beds should review irradiance together with coverage uniformity and operating distance.
The highest output setting is not automatically required for every session. A well-managed studio should define clear protocols for different client groups and train staff to use the machine consistently.
Preset and manual protocols
The control system provides six preset protocols and one manual mode. Staff can select a prepared protocol for regular appointments or use manual mode when different settings are needed.
Adjustable functions include:
- Session time
- Wavelength selection
- Pulse frequency
- Duty cycle
- Body-fan speed
- Temperature settings
- Bluetooth music
- Volume and track control
Pulse frequency can be adjusted from continuous output to 1,000 Hz. When the duty cycle is set to 100%, the LEDs operate in continuous-wave mode. Lower duty-cycle settings create pulsed output.
Preset programs simplify daily operation, while manual control allows experienced facilities to develop their own service routines.
Smart controller and external operation
The standard configuration uses Smart Controller 2.0. A Wireless Pad Controller 2.0 is available as an option.
The system supports usage records, protocol management, Wi-Fi configuration and temperature monitoring. An optional tablet or compatible Android device can also connect to the machine.
For facilities with several employees, preset programs and usage records make staff training and daily management easier. Managers can create approved protocols instead of allowing every operator to change settings freely.
Bluetooth music for client comfort
The M7 series includes a Bluetooth stereo system. Clients can connect to the machine and listen to music during a session.
Music does not affect light performance, but it can improve the overall experience. This is useful for spas and wellness clinics where privacy, comfort and the atmosphere of the treatment room influence repeat bookings.
Cooling system for repeated use
A commercial LED light therapy bed produces heat during operation. The M7 series uses a self-circulating forced-air cooling system to manage the internal temperature.
The body fan provides three adjustable speed levels. The controller also allows staff to manage:
- Cooling-fan startup temperature
- Overheat warning temperature
- Cooling-fan delay after a session
- Current internal temperature
The delayed shutdown allows the fans to continue cooling the machine after the LEDs stop. This helps prepare the bed for the next appointment and protects internal components.
The treatment room must still have suitable ventilation. The bed should not be installed directly against walls or inside a small enclosed area.
Compact commercial footprint
The M7 series measures 2145 × 1060 × 910 mm when closed. Its open height is approximately 1435 mm.
The internal width is approximately 810 mm, while the inner height is 370 mm. This provides suitable space for full-body positioning without requiring the larger footprint of some premium commercial pods.
The complete machine weighs approximately 270 kg. Buyers should check the delivery route, doorway width, lift capacity and floor access before placing the order.
Simple session preparation
For direct light exposure, clients should remove clothing from the intended treatment area. Jewellery, cosmetics and accessories should also be removed where practical.
Protective eyewear is included and should be used during operation. A common routine is 10–20 minutes per session, 3–5 times per week.
The final session plan depends on the selected wavelengths, output settings and individual tolerance. The M7 series is intended for wellness and recovery use and should not replace professional medical advice.
Technical Specifications
| Parameter | M7 / M7+ Specification |
|---|---|
| Product Type | Full-body LED light therapy bed |
| Models | M7 and M7+ |
| Body Colors | Lunar White and Crystal Black |
| Light Source | Taiwan EPISTAR 0.2 W special LED |
| LED Quantity | 13,440 pcs / 26,880 pcs |
| Wavelengths | 633, 660, 810, 850 and 940 nm |
| Irradiance | 48–100 mW/cm² |
| Wavelength Control | Independent control |
| Pulse Frequency | 0–1,000 Hz |
| LED Lifespan | Up to 100,000 hours |
| Control System | Smart Controller 2.0 |
| Optional Controller | Wireless Pad Controller 2.0 |
| Protocols | Six presets plus manual mode |
| Bluetooth Music | Yes |
| Cooling Method | Self-circulating forced-air cooling |
| Body Fan | Three adjustable levels |
| Input Voltage | 220 V or 380 V |
| Current at 220 V | 12 A / 21 A |
| Rated Power | 2,200 W / 4,500 W |
| Product Dimensions | 2145 × 1060 × 910 mm |
| Open Height | 1435 mm |
| Inner Width | 810 mm |
| Inner Height | 370 mm |
| Product Weight | 270 kg |
| Movable Wheels | Yes |
| Protective Eyewear | Included |
| Recommended Use | Spas, clinics, gyms and recovery rooms |
Room and Electrical Planning
Before ordering, buyers should measure the complete delivery route. Check external doors, treatment-room doors, corridors, corners, lifts and any stairs the machine must pass through.
The room needs sufficient ceiling height for the open canopy. Additional space should also be left around the bed for ventilation, cleaning and servicing.
Keep at least 300 mm between the machine and surrounding walls, with more working space where possible. For two beds installed in the same room, approximately 1000 mm between the machines is recommended.
The manual specifies the following electrical preparation:
- For a 220 V configuration, prepare a dedicated single-phase circuit capable of supplying 30 A.
- For a 380 V configuration, prepare a dedicated three-phase circuit capable of supplying 20 A.
The correct breaker, cable size, grounding and connection method must comply with local electrical regulations. A qualified electrician should confirm the final setup before installation.
Applications
Sports recovery centers
The full-body layout allows athletes to complete a session without moving between several devices. It can be included in pre-workout or post-workout wellness routines alongside stretching, massage and other recovery services.
Spas and wellness clinics
The enclosed bed design provides privacy and a premium client experience. Bluetooth music and adjustable cooling help clients remain comfortable during the session.
Gyms and fitness clubs
Gyms can offer LED light therapy as a membership upgrade or a separate paid recovery service. The M7 is suitable for moderate appointment volumes, while the M7+ provides the higher-output configuration.
Beauty and body-care facilities
The red and near-infrared wavelengths can complement existing skin wellness and body-care services. Independent wavelength control allows the facility to create several service options from one machine.
Private wellness rooms
The M7 may also be considered for high-end residential installations. Buyers must confirm room access, ventilation, electrical supply and available floor space before ordering.
What’s Inside
A standard order is prepared according to the confirmed configuration and normally includes:
- One M7 or M7+ LED light therapy bed
- Selected control system
- Bluetooth stereo system
- Protective eyewear
- Integrated cooling system
- Product operation manual
- Warranty card
- Ordered electrical components and accessories
Body color, voltage, electrical connection, controller type, logo and optional accessories should be confirmed in the Proforma Invoice before production.
Frequently Asked Questions
1. What is a full-body LED light therapy bed?
A full-body LED light therapy bed uses red and near-infrared LEDs above and below the user. It provides broad exposure during one session without requiring the client to turn around or move between separate panels. It is commonly installed in spas, gyms and recovery centers.
2. Does an LED light therapy bed use UV light?
No. The M7 and M7+ use red and near-infrared light rather than ultraviolet light. They are not designed to tan the skin. Facilities should explain this difference clearly in client instructions, staff training and website content.
3. What is the difference between M7 and M7+?
The M7 has 13,440 LEDs and 2,200 W rated power. The M7+ has 26,880 LEDs and 4,500 W rated power. Both models use the same wavelengths, dimensions and control features. The M7+ is the higher-output option.
4. What wavelengths does this LED light therapy bed use?
The standard configuration includes 633 nm, 660 nm, 810 nm, 850 nm and 940 nm. Each wavelength can be selected independently. Operators can use individual wavelengths or combine several wavelengths according to the facility’s approved protocols.
5. How strong is the M7 LED light therapy bed?
The specified irradiance is approximately 48–100 mW/cm². Actual exposure varies with wavelength selection, pulse frequency, duty cycle and user position. Buyers should compare output together with coverage, operating distance and cooling performance.
6. How long does an LED light therapy bed session take?
A typical session lasts between 10 and 20 minutes. Many users schedule 3–5 sessions per week. The final session duration depends on output settings and individual tolerance. Studios should create clear operating protocols for their staff.
7. Can the M7 handle several appointments per day?
Yes, the M7 series is designed for commercial use. The forced-air cooling system and delayed fan shutdown help manage internal heat between appointments. Proper room ventilation and reasonable session scheduling are still required.
8. What electrical supply is required?
The bed can be configured for 220 V or 380 V. The manual recommends a dedicated 30 A single-phase circuit for 220 V or a dedicated 20 A three-phase circuit for 380 V. A qualified electrician should confirm the final installation.
9. Can staff create customized LED light therapy protocols?
Yes. The controller provides six preset programs and one manual mode. Authorized staff can select wavelengths and adjust session time, pulse frequency and duty cycle. Advanced settings should be managed only by trained operators.
10. Can the M7 and M7+ be customized for distributors?
Yes. Available options may include body color, logo, voltage, electrical connection, controller configuration and selected software functions. Distributors should provide the destination market, order quantity and certification requirements before requesting the final quotation.
For quotations or room-planning support, please provide the preferred model, destination country, voltage, available room dimensions and expected number of daily appointments. This helps us recommend the more suitable M7 or M7+ configuration.
