This wireless red light cap uses 660nm red light and 850nm near-infrared light to support regular scalp and hair care.
The cap contains 72 three-in-one LEDs, with a 1:2 ratio of red to near-infrared light. Customers can choose from three brightness levels and three pulse settings, including 10Hz, 40Hz and Breathing Mode.
A built-in 2000mAh battery keeps the treatment cordless, while the automatic 30-minute timer gives users a clear and simple routine.
For hair-care brands and distributors, this is an easy product to position: comfortable to wear, simple to demonstrate and compact enough for retail and e-commerce.
- 72 three-in-one LEDs
- 660nm red light and 850nm near-infrared light
- 1:2 wavelength ratio
- 50–90 mW/cm² irradiance
- Three brightness levels
- 10Hz, 40Hz and Breathing pulse modes
- Rechargeable 2000mAh battery
- Automatic 30-minute timer
- Soft neoprene construction
- OEM branding and packaging available
Request Wholesale Pricing or Order a Sample
660nm and 850nm in a 1:2 Ratio
The cap combines two wavelengths commonly used in scalp-care devices.
660nm Red Light
Visible 660nm red light reaches the surface layers of the scalp. It is commonly used to support scalp condition and healthier-looking hair.
850nm Near-Infrared Light
850nm near-infrared light is invisible to the human eye and reaches deeper than visible red light. It complements the 660nm wavelength by providing light exposure at different tissue depths.
The standard ratio is:
- 1 chip of 660nm red light
- 2 chips of 850nm near-infrared light
This gives each LED position a three-in-one configuration while keeping the wavelength mix consistent across the cap.
72 LEDs Across the Scalp
The cap contains 72 LED positions, with three chips inside each LED.
This provides a total of 216 individual light-emitting chips distributed across the top and surrounding areas of the scalp.
Compared with a handheld comb or small light device, customers do not need to treat one section at a time. Once the cap is in place, the light is delivered across a wider area during the same session.
Customers with thick or long hair should part the hair where possible so more light can reach the scalp.
Three Brightness Levels
Not every customer wants the same light intensity, especially during the first few sessions.
The built-in controller offers three brightness levels:
- Low
- Medium
- High
New users can begin at a lower level and adjust the brightness based on comfort.
For brands, this makes the product easier to sell to a wider customer group without creating several different versions.
Three Pulse Settings
The cap also provides three pulse options.
| Pulse Mode | Light Output |
|---|---|
| 10Hz | Slower rhythmic pulse |
| 40Hz | Faster rhythmic pulse |
| Breathing Mode | Light gradually brightens and dims |
Continuous light can be used for a standard session, while the pulse settings give customers more choice.
The modes are easy to show in product videos and give retailers a clear feature beyond basic on-and-off operation.
Cordless 30-Minute Sessions
The built-in 2000mAh battery allows the customer to use the cap without staying beside a wall outlet.
It can be worn while reading, working at a desk or relaxing at home. There is no external battery pack hanging from the product and no power cable limiting movement during treatment.
The automatic timer turns the device off after 30 minutes, so the customer does not need to monitor the session.
USB charging also makes the product easier to supply across different markets without preparing several regional power adapters.
Comfortable to Wear, Easier to Ship
The red light cap is made from neoprene and soft fabric rather than a rigid plastic shell.
It follows the shape of the head, feels less bulky and can be adjusted to fit most adult head sizes. Buyers do not need to manage several separate size-related SKUs.
Its soft construction also takes up less warehouse and shipping space than many hard-shell hair therapy helmets.
This makes it suitable for online retail, local distribution and private-label hair-care ranges.
Product Specifications
| Specification | Details |
|---|---|
| Model | CP008 |
| Product Name | Wireless Red Light Cap |
| Application | Hair and scalp care |
| Color | Black |
| Material | Neoprene and fabric |
| Product Size | 31 × 21 × 13 cm |
| Product Size in Inches | 12.2 × 8.3 × 5.1 in |
| LED Quantity | 72 LEDs |
| LED Type | Three-in-one chips |
| Total LED Chips | 216 chips |
| Wavelengths | 660nm and 850nm |
| Wavelength Ratio | 1:2 |
| Irradiance | 50–90 mW/cm² |
| Brightness | 3 levels |
| Pulse Settings | 10Hz, 40Hz and Breathing Mode |
| Treatment Time | Automatic 30-minute session |
| Rated Voltage | 5V |
| Rated Power | 10W |
| Battery Capacity | 2000mAh |
| Charging Method | USB charging |
| Material | Neoprene and double-sided fabric |
| Operating Temperature | 40–50°C |
| Warranty | 1 year |
| Sample Order | From 1 unit |
| OEM/ODM | Available |
How to Use
- Fully charge the battery before first use.
- Make sure the hair and scalp are clean and dry.
- Part thick hair where possible.
- Put on the cap and adjust the strap for a comfortable fit.
- Press the power button to turn on the device.
- Select the preferred brightness level.
- Choose continuous light, 10Hz, 40Hz or Breathing Mode.
- Wear the cap for the automatic 30-minute session.
- Turn it off and store it in a dry place after use.
A typical routine is 3–5 sessions per week. Customers should follow the final user manual supplied with the product.
Regular use matters more than extending the session time.
Where It Fits in Your Product Range
Hair-Care Brands
The cap can be sold alongside shampoos, serums, supplements and scalp massage products. It adds a higher-value device to an existing hair-care range.
Beauty and Wellness Retailers
The familiar cap design is easy for customers to understand. There is no complicated installation or lengthy setup.
Hair Salons
Salons can offer it as a take-home product for customers who want to continue their scalp-care routine between appointments.
Scalp-Care Centers
The product can be used as part of a wider scalp wellness service or sold separately for home maintenance.
E-Commerce Sellers
The wireless design, visible red light and adjustable controls work well in product photos and short demonstration videos.
Distributors and Wholesalers
The compact construction helps reduce storage volume. Buyers can begin with neutral packaging and move to a branded version after testing local demand.
Private-Label Options
The standard model can be supplied without branding or customized for your market.
Available options include:
- Logo on the cap
- Cap color
- Material and trim
- Product label
- USB charging cable
- English or multilingual manual
- Retail box
- Gift packaging
- Barcode
- Carton marks
If you already have artwork, send us the files so we can check the dimensions and printing details.
For a new project, testing the standard version first is usually the safer option. Your team can check the fit, light output, battery and controls before deciding which changes are necessary.
Standard Package
Each box includes:
- 1 × Wireless Red Light Cap
- 1 × USB Charging Cable
- 1 × English User Manual
- 1 × Neutral Color Box
Branded packaging and multilingual manuals are available for private-label orders.
Start With a Sample
Samples are available from one unit.
A physical sample allows your team to check:
- Cap size and fit
- Material and stitching
- LED coverage
- Brightness levels
- Pulse settings
- Battery operation
- USB charging
- Button response
- Packaging
- Overall customer experience
For customized projects, a pre-production sample can be arranged before mass production.
Quality Checks
Each unit is tested before packing.
The inspection covers:
- 660nm and 850nm output
- LED operation
- Three brightness levels
- 10Hz pulse mode
- 40Hz pulse mode
- Breathing Mode
- Automatic timer
- Battery charging
- USB connection
- Buttons and indicators
- Internal wiring
- Cap material and stitching
- Product appearance
- Packaging
For branded orders, the approved sample will be used as the production reference.
Cleaning and Storage
Disconnect the charging cable before cleaning.
Wipe the inside of the cap with a soft, slightly damp cloth. Do not immerse the LEDs, battery or charging connection in water.
Avoid alcohol, strong detergents and abrasive cleaning materials. Make sure the cap is completely dry before the next use.
Store it in a clean, dry place away from excessive heat and direct sunlight. Do not sharply fold the LED section or pull the internal wiring.
Safety Information
- Do not look directly at the illuminated LEDs.
- Use suitable eye protection if the light causes discomfort.
- Do not use the cap on wet hair.
- Keep the battery and charging port away from water.
- Do not use a damaged charging cable.
- Stop using the device if unusual heat, irritation or discomfort occurs.
- Consult a healthcare professional if you have photosensitivity or take light-sensitive medication.
- Seek professional advice before use if you have an existing scalp condition.
- Keep the product away from children when not in use.
This product is intended for general hair and scalp care. It is not intended to diagnose, treat, cure or prevent disease. Results vary between users.
Frequently Asked Questions
What is a red light cap used for?
It delivers red and near-infrared light across the scalp as part of a regular hair and scalp-care routine.
Which wavelengths does it use?
It uses 660nm red light and 850nm near-infrared light in a 1:2 ratio.
Is it a laser cap?
No. It uses LEDs rather than laser diodes.
The flexible LED construction allows the cap to remain soft and lightweight.
How many LEDs are inside?
There are 72 three-in-one LEDs.
Each LED contains one 660nm chip and two 850nm chips, giving a total of 216 light-emitting chips.
What pulse modes are available?
The available pulse settings are 10Hz, 40Hz and Breathing Mode. Continuous light can also be used.
How long is one session?
One session lasts 30 minutes.
The built-in timer turns off the device when the session is complete.
How often should it be used?
A typical routine is 3–5 sessions per week.
Customers should follow the supplied manual and avoid extending the session time unnecessarily.
Is it completely wireless?
Yes. The cap has a built-in 2000mAh rechargeable battery and is charged through a USB cable.
Can we add our logo and packaging?
Yes. The logo, product label, manual, retail box and carton marks can be customized.
Can we order one sample first?
Yes. Samples are available from one unit.
Testing a sample first allows your team to check the fit, light settings, battery and overall quality before customization.
